Altimeter-Recorder EasyMega v1.0 - AltusMetrum

All the power of TeleMetrum without GPS and telemetry link.

The EasyMega is a high-end recording dual-deploy altimeter for high power model rocketry. It has the same features of TeleMega without the GPS and telemetry link.

379,99 €

Bruttopreis

Nicht auf Lager

Sichere Zahlungen: Kreditkarte, PayPal, Banküberweisung

Schneller Versand – Wir versenden weltweit

Einfache Rückgabe von Kits und Zubehör

Altimeter, accelerometer, gyroscope and even a magnetic sensor, all programmable!

The EasyMega is a dual deployment recording altimeter with all the functions of TeleMetrum, but without the GPS and the radio link.

This device has both a barometric sensor and an accelerometer on 3 axis, and 4 of its 6 channels are fully programmable. This comes very handy when you have a complex project, with strap-on boosters, multi stages, clusters or air-starting. The flight data are stored on a non-volatile memory onboard and can be downloaded on your computer via the USB interface.

When to use this device?

With its 4 programmable channels and 2 dual-dployment dedicated channels the limit is only your imagination: multistages, airstarts, motor clusters, strap-on boosters and external devices. All of this can be programmed to be activated upon any event, or below or over a certain value of, say, acceleration or speed. It detects motor burnouts, and it can even be programmed to activate a channel below a given angle, thus increasing the safety of upper stages ignition.

It is clear that this device is a real flight computer to be used in your most sophisticated projects.

Features

Recording altimeter for high power model rocketry
Supports dual deployment and 4 additional pyro events.
Pyro events are configurable and can be based on time and various flight events and status, including angle from vertical (for safety in staging and air start flights).
Barometric pressure sensor good to 30k meters MSL
1-axis 105-g accelerometer for motor characterization
3-axis 16-g accelerometer for gyro calibration
3-axis 2000 deg/sec gyros
3-axis magnetic sensor
On-board non-volatile memory for flight data storage
USB for power, configuration, and data recovery
Integrated support for LiPo rechargeable batteries
User choice of pyro battery configuration, can use primary LiPo or any customer-chosen separate pyro battery up to 12 volts nominal.
57 x 32 mm board designed to fit inside 38mm airframe coupler tube