Referencia: ACPCALOG
Marca: Titebond
Pegamento alifático - Titebond
Botella de cola alifática para madera, cartón y otros materiales porosos.
9,50 €
- No hay más artículos en su carrito
- Transporte
- Total 0,00 €
Novedades
Referencia: ESKBLBR3
Marca: Estes
Black Brant III - Estes
Réplica a escala del famoso cohete sonda Black Brant III, para motores de cohetes modelo de 18 mm tipo A, B o C.
16,50 €
Referencia: CTRF32WH
Marca: Cesaroni
53F32WH-12A - Recarga de 29 mm CTI
Recarga blanca F32, con retardo ajustable de 12 segundos para motores recargables P29-1G.
42,50 €
Referencia: CTRJ316P
Marca: Cesaroni
654J316PI-17A - Recarga de 38 mm CTI
Recarga J316 Pink para motor recargable Cesaroni P38-5G. El retardo de 17 segundos se puede ajustar mediante la herramienta ProDAT 38
134,50 €
Referencia: ACPEMATC
Marca: Daveyfire
E-match (chip-type)
E-match por cargos de expulsión. Para ser utilizado con altímetros u otros dispositivos electrónicos.
0,79 €
Referencia: ESMB0604
Marca: Estes
Motores Estes B6-4
Máxima versatilidad para cualquier cohete.Entre los motores para cohetes más utilizados hasta la fecha, el Estes B6-4 es el motor adecuado para la gran mayoría de cohetes Estes y similares.
15,95 €
Referencia: ESMC0605
Marca: Estes
Motores Estes C6-5
Motores C, 18 mm, para cohetes modelo. Retraso de 5 segundos, para cohetes de una sola etapa.
17,70 €
-
Banner
38 mm
Motores recargables de 38 mm de diámetro y accesorios. Todos menos unos pocos para recargas de alta potencia. Podrás encontrar las recargas en sus respectivas categorías.
Referencia: CTM38KIT
Marca: Cesaroni
Pro38 - Starter Kit - CTI
Set of 38mm Cesaroni P38 reloadable motors, to use all reloads from 1G to 6G. The Pro38 motors do not require the rear threaded closure because it is already included in the reloads.
229,95 €
Referencia: ATCRAS38
Marca: Aerotech
38 mm Reload Adapter System - Aerotech
Get the most out of your reloadable 38 mm motors.The Reload Adapter System allows the use of many types of reloads with only a few different engines, which saves on their purchase.
70,99 €
Referencia: ATCFCR38
Marca: Aerotech
Forward Closure Retainer Ring 38 mm - Aerotech
This retainer ring replaces the standard forward closure of 38 mm RMS motors when using RMS-EZ reloads
31,99 €
Referencia: CTM3803G
Marca: Cesaroni
Reloadable motor P38-3G - CTI
Reloadable 38mm motor Cesaroni P38-3G. The aft threaded closure is not required because it is included in the motor reload. Uses High Power reload kits of H and I class that can be purchased by owner of an HPR Certification Level 1
84,50 €
Referencia: CTM3801G
Marca: Cesaroni
Reloadable motor P38-1G - CTI
Reloadable 38mm motor Cesaroni P38-1G. The aft threaded closure is not required because it is included in the motor reload.
49,95 €
Referencia: ATCFCP38
Marca: Aerotech
Forward Closure cieca 38 mm - Aerotech
Replacement part for all RMS-38 mm high power rocket motor systems. Use this plugged closure (no ejection charge) when you are using an electronic device for parachute ejection and your motor compartment is sealed.
54,30 €
56,99 €
Referencia: ATCFCT38
Marca: Aerotech
Forward Closure threaded and plugged - 38 mm - Aerotech
Forward plugged and threaded closure for Aerotech and Monster 38 mm reloadable rocket motors. It is used when the ejection charge is not needed and to retain the motor through a threaded rod or to thread a ring for parachute attachment.
56,99 €
Referencia: ATC38600
Marca: Aerotech
Case 38/600 - Aerotech
High Power 38/600 reloadable motor casing only. Does not include closures. If you already own a 38 mm High Power RMS motor, with this case you can use all the reloads kits made for it.
106,50 €
Referencia: ATC38108
Marca: Aerotech
Case 38/1080 - Aerotech
High Power 38/1080 reloadable motor casing only. Does not include closures. If you already own a 38 mm High Power RMS motor, with this case you can use all the reloads kits made for it.
127,50 €
Referencia: ATC38120
Marca: Aerotech
Case 38/120 - Aerotech
High Power 38/120 reloadable motor casing only. Does not include closures. If you already own a 38 mm High Power RMS motor, with this case you can use all the reloads kits made for it.
63,99 €
Referencia: CTM3806G
Marca: Cesaroni
Reloadable motor P38-6G CTI
Reloadable 38mm motor Cesaroni P38-6G. The aft threaded closure is not required because it is included in the motor reload.Uses High Power reload kits of J class that can be purchased by owner of an HPR Certification Level 2
115,00 €
Referencia: CTM3804G
Marca: Cesaroni
Reloadable motor P38-4G CTI
Reloadable 38mm motor Cesaroni P38-4G. The aft threaded closure is not required because it is included in the motor reload.Uses High Power reload kits of I class that can be purchased by owner of an HPR Certification Level 1
99,95 €
Referencia: CTM3802G
Marca: Cesaroni
Reloadable motor P38-2G - CTI
Reloadable 38mm motor Cesaroni P38-1G. The aft threaded closure is not required because it is included in the motor reload. Uses High Power reload kits of H class that can be purchased by owner of an HPR Certification Level 1
69,50 €
Referencia: ATC38240
Marca: Aerotech
Case 38/240 - Aerotech
High Power 38/240 reloadable motor casing only. Does not include closures. If you already own a 38 mm High Power RMS motor, with this case you can use all the reloads kits made for it.
77,99 €
Referencia: ATC38360
Marca: Aerotech
Case 38/360 - Aerotech
High Power 38/360 reloadable motor casing only. Does not include closures. If you already own a 38 mm High Power RMS motor, with this case you can use all the reloads kits made for it.
84,99 €
Referencia: ATC38480
Marca: Aerotech
Case 38/480 - Aerotech
High Power 38/480 reloadable motor casing only. Does not include closures. If you already own a 38 mm High Power RMS motor, with this case you can use all the reloads kits made for it.
99,45 €
Referencia: ATC38720
Marca: Aerotech
Case 38/720 - Aerotech
High Power 38/720 reloadable motor casing only. Does not include closures. If you already own a 38 mm High Power RMS motor, with this case you can use all the reloads kits made for it.
111,50 €
Referencia: ATCFCO38
Marca: Aerotech
Cierre delantero 38mm - Aerotech
Cierre delantero estándar para motores de cohetes recargables de alta potencia Monster de 38 mm. Este es el cierre habitual con espacio de retardo y receptáculo de carga de eyección.
54,50 €
Referencia: ATCFSD38
Marca: Aerotech
Disco delantero 38mm - Aerotech
Disco de sellado para motores recargables Aerotech High Power RMS 38/480, RMS 38/600, RMS 38/720 y RMS 38/1080. Requerido para todas las recargas utilizadas en estos motores.
18,50 €