- Fuera de stock
Referencia: ACPCALOG
Marca: Titebond
Pegamento alifático - Titebond
Botella de cola alifática para madera, cartón y otros materiales porosos.
9,50 €
- No hay más artículos en su carrito
- Transporte
- Total 0,00 €
Novedades
Referencia: ESKBLBR3
Marca: Estes
Black Brant III - Estes
Réplica a escala del famoso cohete sonda Black Brant III, para motores de cohetes modelo de 18 mm tipo A, B o C.
16,50 €
Referencia: CTRF32WH
Marca: Cesaroni
53F32WH-12A - Recarga de 29 mm CTI
Recarga blanca F32, con retardo ajustable de 12 segundos para motores recargables P29-1G.
42,50 €
Referencia: CTRJ316P
Marca: Cesaroni
654J316PI-17A - Recarga de 38 mm CTI
Recarga J316 Pink para motor recargable Cesaroni P38-5G. El retardo de 17 segundos se puede ajustar mediante la herramienta ProDAT 38
134,50 €
Referencia: ACPEMATC
Marca: Daveyfire
E-match (chip-type)
E-match por cargos de expulsión. Para ser utilizado con altímetros u otros dispositivos electrónicos.
0,79 €
Referencia: ESMB0604
Marca: Estes
Motores Estes B6-4
Máxima versatilidad para cualquier cohete.Entre los motores para cohetes más utilizados hasta la fecha, el Estes B6-4 es el motor adecuado para la gran mayoría de cohetes Estes y similares.
15,95 €
Referencia: ESMC0605
Marca: Estes
Motores Estes C6-5
Motores C, 18 mm, para cohetes modelo. Retraso de 5 segundos, para cohetes de una sola etapa.
17,70 €
-
Banner
Case 75/2560 - Aerotech
High Power 75/2560 reloadable motor casing only. Does not include closures. If you already own a 75 mm High Power RMS motor, with this case you can use all the reloads kits made for it.
Pagos seguros: Tarjeta de crédito, PayPal, Transferencia bancaria
Envío rápido: enviamos a todo el mundo
Devoluciones sencillas de kits y accesorios
Descripción
This casing is the body of an RMS 75/2560 Aerotech reloadable motor. It does not work alone as it needs a forward closure and a rear closure to be a complete reloadable motor. By purchasing this case you can use reloads different from the ones you use in the RMS 75 mm motor you own. If you don't own any 75 mm high power motor you may want to purchase a complete motor set instead. Please look in the reloadable motors category in our webshop for the motor best suited to your needs.
Aerotech reloadable motors have been manufactured by Rouse Tech until 2014, anodized in blue or yellow. The production has been taken over by Aerotech, with a black anodizing. For this reason this motor can be shipped in blue color until Rouse-made motors will be replaced by black Aerotech.
Uses Aerotech HPR K reloads (K560W, K780R).
Note: a valid Tripoli Rocketry Association Level 2 High Power certification is required to purchase type "K" reloads.
Detalles del producto
ATC75256
Ficha técnica
- Longitud
- 332,7 mm
- Diámetro
- 75 mm
- Peso
- 570 gr
5 otros productos en la misma categoría:
Referencia: ATC75512
Marca: Aerotech
Case 75/5120 - Aerotech
High Power 75/5120 reloadable motor casing only. Does not include closures. If you already own a 75 mm High Power RMS motor, with this case you can use all the reloads kits made for it.
577,00 €
Referencia: ATC75384
Marca: Aerotech
Case 75/3840 - Aerotech
High Power 75/3840 reloadable motor casing only. Does not include closures. If you already own a 75 mm High Power RMS motor, with this case you can use all the reloads kits made for it.
543,00 €
Referencia: ATCAC075
Marca: Aerotech
Aft Closure 75 mm - Aerotech
Aft closure for Aerotech or Monster 75 mm reloadable motors
103,75 €
Referencia: ATC75640
Marca: Aerotech
Case 75/6400 - Aerotech
High Power 75/6400 reloadable motor casing only. Does not include closures. If you already own a 75 mm High Power RMS motor, with this case you can use all the reloads kits made for it.
619,00 €
Referencia: ATCFSD75
Marca: Aerotech
Forward Seal Disk 75 mm - Aerotech
Forward seal disc for Aerotech/Monster 75 mm reloadable motors. This is a replacement part, the disc is normally included in RMS 75/5120, RMS 75/6400 and RMS 75/7680 motor hardware.
48,80 €
High Power 75/2560 reloadable motor casing only. Does not include closures. If you already own a 75 mm High Power RMS motor, with this case you can use all the reloads kits made for it.