Pro-38 reloadable motor hardware is very easy to use. Select your reload, adjust the delay following your needs, push the reload into the casing and thread the rear closure. You do not need any additional closure because are both included in each reload. After each flight you just have to dispose of the burned reload and clean the motor. The motor can be used an indefinite number of times.

Cesaroni hardware is very easy to clean after each flight with damp cloth as the reloads do not leave many residues on the internal surface.

You can use reloads made for P38-1G motors by using one Pro38 Spacer. Please remember these casings are not compatible with Aerotech reloads.

When to use this engine?

This motor uses H type reloads therefore is an ideal choice for your Level 1 certification flight with rockets with a 38 mm motor mount.

The following reloads can be used with this motor (Level 1 certification required):

266H125-12A
286H100-15A
261H120-14A
232H123-14A
276H152-15A
247H143-13A
273H225-14A
269H110-14A
255H400-13A